Custom New 300×300mm Plate Vulcanizing Machine
Product brief introduction
Featuring a PLC program with a color touch panel and an HMI
operating system, the equipment allows easy configuration of
process settings such as temperature, pressure, cycle time, and
exhaust counts. The vulcanization progress is instantly displayed
and monitored. Automated execution of programs ensures an
intelligent, efficient system with a straightforward structural
design.
Platen Press Technical Data
| CF-300B | CF-400B | CF-500B | Remarks |
| Capacity | 30T | 30T | 30T | Working pressure /working area/number of floors/cooling and heating
plates can be customized according to customer requirements |
| Working Area | 300MM*300MM | 400MM*400MM | 500MM*500MM |
| Number of Floors | Two floors | Two floors | Two floors |
Cooling and
Heating Plate | One for heating
One for cooling | One for heating
One for cooling | One for heating
One for cooling |
| Total Power | 11KW | 15KW | 20KW |
| Weight | 750KG | 950KG | 1200KG |
Product Superiority
1.Heating plate: Made of imported high temperature resistant steel, the surface is
treated with deep carbonization, hard chrome plating and other
processes, with the characteristics of fast heat transfer,
corrosion resistance, high hardness, no deformation, etc. Built-in
heater and temperature sensor on the back, high power, fast
heating, sensitive and uniform temperature measurement, small
temperature error range.
2.Cold conduction plate: Aluminum material, anodized surface, corrosion-resistant, fast
heat conduction.
3.Guide columns: Four hardened and precisely positioned columns and hydraulic
cylinders, supported by a thick steel plate base of the entire
control box, the hydraulic platform, on the columns with
self-lubricating bronze bearings, guide sliding, lifting and
lowering smooth and noiseless; the top and rear of the tablet press
are surrounded by heavy steel to provide additional safety
protection for the operator; the upper layer is steel plate - with
inserted thermocouples in the middle near the surface.
Operating Principle
The raw materials are placed in the mold, the rubber is shaped
under rated pressure and temperature, and the product reaches the
melting point after a certain period of time, thus obtaining a
product with certain physical properties.
Application
Mainly used in rubber and its products, plastic and its products,
polyolefins, PVC, films, coils, profiles production and polymer
blending, pigments, masterbatches, stabilizers, stabilizers and
other industries. Its main purpose is to test the changes and
comparisons of the physical properties of raw materials after
molding. Such as: color dispersion, light transmittance, glossiness
of the material surface, whether there are black spots, its
strength, plasticity, hardness after adding auxiliary materials,
etc.
It is suitable for factories to inspect the physical properties of
suppliers' raw materials, compare similar products, and develop new
products by the R&D departments of colleges and universities.
It can be used as a reference for factories before mass production.
Typical applications:
1. Detection of gel (fish eyes), black spots, stains, etc. of raw
materials
2. Pressing and sample preparation of raw materials
3. Physical property testing
4. Material research and development
